Thursday, January 31, 2008

WIRING YOUR AMP:

To get the wires to the amp, bundle and tuck them under the doors sill and back seats, all the way to the trunk. Use wire ties and electrical tape to fasten your bundle to any preexisting wires along the way.

On to connecting the amp’s ground. The ground wire is short and the same gauge as the power. It must be connected to the bare metal of the chasses or frame. Find a near by bolt and sand or scrape away any paint. Secure the ground wire using the ring terminal supplied in your amp kit. If you have to use a screw, watch where you’re going and use a short screw--you don’t want to hit your gas tank.


For Stereo Accessories go to:
http://aawholesaler.com