Monday, March 3, 2008

STEP 6.


If your in-dash radio has preamp (RCA) outputs, connect the RCA patch cables (included with most kits) to these outputs, taping them together so they won't come apart. Route the patch cables (again, using wire ties) to the OPPOSITE side of the vehicle from the power cable and blue turn on lead. It's important to separate the patch cables from the power wires to avoid potential noise problems. Now you can partially re-install the radio in the dash (don't push it all the way in, in case you need to fix a problem later).



For AMP Accessories go to:
http://aawholesaler.com